氫氧化鉀如果長時間不用,如果我們不能確保它的存儲環境,所以會導致受影響的產品與潮濕,潮濕的影響,再加上空氣中的氧氣和水,很容易產生粘結問題,一旦產品粘結,以備后用,效果會打折,所以我們必須注意操作的保護,我們就容易理解結塊的原因。
　　If potassium hydroxide is not used for a long time, if we can't ensure its storage environment, it will lead to the impact of affected products and humidity, plus the oxygen and water in the air, it is easy to produce bonding problems. Once the product is bonded for later use, the effect will be discounted, so we must pay attention to the protection of operation, and we can easily understand the reason of agglomeration.
　　1、吸濕結塊。
　　1. Hygroscopic caking.
　　氫氧化鉀包裝采用雙層包裝袋，如果縫不夠快或縫不夠嚴，產品在包裝袋內容易吸潮，影響其質量。為此，將原來的單縫改為雙縫，并要求包裝人員檢查裝夾、縫合等工序，以達到很大程度的隔離空氣，大大減少了由于結塊問題而導致的密封松動的發生。
　　Potassium hydroxide is packed in double-layer bags. If the seams are not fast enough or tight enough, the products are easy to absorb moisture in the bags and affect their quality. For this reason, the original single seam is changed to double seam, and the packaging personnel are required to check the clamping, sewing and other processes, so as to achieve a great degree of air isolation, greatly reducing the occurrence of loose sealing caused by caking problems.
　　2. 受溫度的影響。
　　2. Affected by temperature.

　　氫氧化鉀的溫度是由汽包的冷卻水流量和汽包的轉速決定的。循環水的體積、循環水的溫度、料筒中的噴嘴是否堵塞、料筒是否結垢直接影響產品的溫度，并嚴重影響機械下料溫度的均勻性。清洗噴嘴后，清洗桶內水垢，增加循環水體積，將產品溫度從63c-66c降至58C。通過降低沖裁溫度，可以減輕結塊現象。
　　The temperature of KOH is determined by the cooling water flow of drum and the rotating speed of drum. The volume of circulating water, the temperature of circulating water, whether the nozzle in the barrel is blocked, and whether the barrel is scaling directly affect the product temperature, and seriously affect the uniformity of the mechanical cutting temperature. After cleaning the nozzle, clean the scale in the barrel, increase the volume of circulating water, and reduce the product temperature from 63c-66c to 58c. By reducing the cutting temperature, the caking can be reduced.
　　氫氧化鉀粘結的原因有很多種,與環境的關系,溫度,有非常大的,所以我們應該特別注意這兩個方面,為了避免影響我們的使用,對其日常保護和存儲需要考慮很多因素,每個鏈接不能草率,畢竟,它的質量也影響使用效率的基本因素之一。
　　There are many reasons for potassium hydroxide bonding, such as the relationship with the environment, temperature, and so on. Therefore, we should pay special attention to these two aspects. In order to avoid affecting our use, we need to consider many factors for its daily protection and storage. Each link should not be hasty. After all, its quality also affects one of the basic factors of use efficiency.